banner
Home / Products / Clips
Products
Bridge Prestressed Anchorage Porous Anchorage Bridge Anchorage Clip

Bridge Prestressed Anchorage Porous Anchorage Bridge Anchorage Clip

The technical standards 1. The varieties, specifications and quality of prestressed tendons, anchors, fixtures and conne
Basic Info
Model NO. HF-ES0001
Origin China
HS Code 7316000000
Production Capacity One Million /Year
Product Description

Bridge Prestressed Anchorage Porous Anchorage Bridge Anchorage Clip

Bridge Prestressed Anchorage Porous Anchorage Bridge Anchorage Clip

Bridge Prestressed Anchorage Porous Anchorage Bridge Anchorage Clip

Bridge Prestressed Anchorage Porous Anchorage Bridge Anchorage Clip


The technical standards

1. The varieties, specifications and quality of prestressed tendons, anchors, fixtures and connectors meet the design requirements and the provisions of the current national standards.

2. The prestressed tendons shall be smooth without bending;There are no cracks, spines, mechanical damage, iron oxide and grease on the surface.

3. The shrinkage of clamping clips of clamping anchors shall be no more than 6mm, and the friction loss of anchor mouth and horn mouth shall be no more than 6%.

4. The anchor meets the requirements of graded tensioning, reinforcing tensioning and relaxing prestressing tendons.For post-tensioning structure, grouting hole or vent are set on the anchor or its accessories. The grouting hole location and aperture meet the requirements of grouting process, and there is a structure connecting with the grouting pipe.Connection structure shall be provided on the anchor or its accessories when the closure cover is used.

5, the fixture has good self-anchor performance, loose anchor performance and reuse performance.Clamps that need to be struck to loosen must ensure that they have no effect on the anchorage of prestressed tendons and ensure the safety of operators.

6. The material performance indexes of anchors, fixtures and connectors shall not be lower than no.45 steel, which shall meet the design requirements, and shall have certificates of mechanical performance and chemical composition and quality guarantee.

7. For anchors used to anchor steel strand with a diameter of 915.2mm, the minimum diameter and thickness of anchor plates with holes 1 to 21 conform to the following table, and the anchor plates with holes 22 and above can be implemented according to the design document.

Minimum diameter and thickness of 1 ~ 21 hole anchor plate

The anchor holeAnchor plate size (mm)The anchor holeAnchor plate size (mm)The anchor holeAnchor plate size (mm)
diameterthicknessdiameterthicknessdiameterthickness
148488136551518668
286509146551619670
3915010156581719673
41025011166581820675
51125012166601920675
61265213170632022680
71265314176652122680

8. For anchors used to anchor steel strand with a diameter of 915.2mm, the edge distance of anchor plate at the outer edge of the large mouth of the outer cone hole of the anchor plate shall be no less than the following table.

The minimum distance of the outer edge of the outer edge of the outer cone hole of the anchor plate

Number of holesThe minimum distance
1~511.0mm
6~1213.0mm
13~1715.0mm
18~2117.0mm

9. The depth of the limit plate groove of clamp-type anchor shall match the diameter of steel strand.

10. Inspect appearance and dimension, hardness and static load anchorage performance of anchors, fixtures and connectors in batches and quantities before use.Work anchors and tool anchors shall not be substituted for each other.

11. Anchor backing plate shall have sufficient stiffness and strength. The length shall ensure that the maximum folding Angle of steel strand at the bottom opening of anchor is no more than 4°, and the flatness of end face is no more than 0.5mm.


-----------------------------------------------------------------------

 

The anchoring system of spheroidal graphite cast iron integrated anchor is designed for unbonded PC strand based on the application of PC strand anchorage in recent 20 years in China.Its feature is that the anchorage at the tension end adopts the spheroidal graphite to integrate the bearing plate and anchor head.It has compact structure and reliable anchoring, Its performance meets the national requirements of GB/t14370-2000, and it is also applicable to 2000MPa PC strand.In addition, the biggest advantage of the anchoring system is that the full length of PC strand can be fully sealed.